Aqua Products Company, Inc.

Home Reverse Cycle Chiller RCS Design

For installation simplicity, the Reverse Cycle Chiller system provides heating and cooling in one system. It is designed as an air-source heat pump using two insulated pipes to deliver water in a closed loop for hydronic heating and chilled water air conditioning. Reverse Cycle Chiller is built with a high efficiency UPG (York, Coleman or Luxaire) heat pump, the system takes advantage of air to water to air heat transfer to deliver outstanding performance at temperatures of 10° f and lower. Site preparation is much simpler too. Unlike ground source heat pumps, Reverse Cycle Chiller doesn't require digging a geothermal well for use as a heat source. Instead, a tank is used for capacity control to protect the system during times of low output and during defrost cycling and to prevent the unit from short-cycling in summer.

Made in America



© 1993 - 2010 Aqua Products Company, Inc. - All Rights Reserved